An espresso is a home machine that plays a very crucial role in preparing a dark and a tasty coffee. Just like most of the home machines. An espresso is not a complex device and it has a couple of moving parts. This makes it prone to breakage and malfunction. Once an espresso machine breaks. It will lower the quality of the coffee it prepares and this will be a disgrace to the owner of this device. There are common problems that are associated with an espresso machine and we have given a guideline on how to fix these errors. With the guideline and procedure. You can fix this problem yourself or take it to professionals who will do it on your behalf.
How to fix Espresso Machine
A device will not heat up and it will plug in and also turned on.
When your espresso machine develops this problem you can’t do much to it. Until you open it up and tinker around inside. The same procedure will still use regardless of whether you fix it on your own. Or you take your machine to someone to do it for you.
When no water comes through your espresso machine then definitely there is a problem that needs to be fixed and most probably it is vapor locked. If the machine is choking on air, the first thing you should do to the machine is to prime the pump first. You can do this by opening the steam valve which is on the steam wand after which you give it half a minute or more to run.
The procedure that will take up to six minutes to fix this problem.
- First, let the machine to cool completely
- Fill the water tank reservoir with fresh, cool and filtered water. The brew head screen should be clean, smooth side down, waffle side up and it should not crimp the water hose.
- Put a water collector more so a cup under the brew head and steam wand, switch on the power wand and with the immediate action open the steam wand to run for 2 minutes.
- After this turn on the brew button and give it an allowance of running for other 2 minutes.
- Turn off the brew button at the fourth minute and for another two minutes, keep steam wand open and then turn off the machine.
- After 2-4 minutes you will notice that water will begin flowing normally through the espresso machine. After an estimation of one cup has flown through the brew head and steam wand. Then it will fix the vapor lock. If nothing happens and up to the sixth minute there is no water flowing, have the machine turned off, wait until the brew head cools after which you will repeat the same process.
- If your espresso machine has the problem of leaking water from the pump. Then a poor seal on the shaft or the 0-ring will attribute to this. The only solution to this problem is to purchase a new ring that is of the correct diameter to the ring or shaft. The instruction manual will give the appropriate size, number or part. Before you replace the real disconnect. The machine from the power source supply, asses the pump, clean the area after removing the malfunction seal and then add the new seal.
Disruption to the seal and makes water to start leaking from between the group head and the basket.
To fix the issue, simply wipe the rim of the basket after tamping every time you use the machine.
Loose connection of inlet and outlets also cause leaking of the espresso machine. The hex nut which found on the pressure relief valve can cause leaking if it is loosely fixed. This is one of the simplest issues to fix because all that you need is to disconnect the machine from power. And when it cools down you can easily tighten the loose nut using your fingers.
At other times the espresso has a bitter and a burnt taste.
You can easily note an occurrence of this because of the very slow delivery. Grinding the coffee grounds to be coarser can be a solution to this problem. Too fine coffee grounds makes the water to pass slower through them with more resistance absorbing too much from them and at long last. A very unpleasant and a bitter taste is the outcome. Over tamping in the basket is another cause of this bitter and unpleasant taste since it also causes excessive resistance. You can solve this by using different grades of grinding and different tamping levels. If the problem persists, a pilling of residue or coffee grinds in the group head can attribute to this. To fix this problem. Unscrew the screws holding the screen which is inside the group head. Take out the screen and then clean it under hot water.
Magnetic floater which sits in the tank has got stuck in place instead of floating in its normal position on the water top.
To fix this issue. Make sure that the espresso machine disconnected from the power source. Then take out the magnet from the tank. And clean it thoroughly after which you will return it back to the tank. Another cause of this problem is the accumulation of coffee grounds and limescale around the tank edges. Through cleaning of a tank is the suitable way of fixing this problem.
An espresso machine can experience a lot of issues. The best thing to do is to repair them before they become more complicated. Give rise to other issues make the machine be rendered useless and nonfunctional.
You might also like: Top 10 Best EspressoMachine